If you are an existing member and your password is not working or has expired click here enter your email address then click on "Forgot password"


If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

If you have questions please use the Contact Page for a personal response

If you wish to contribute to our discussions then please consider joining the club - its a mere £18 per year and worth every penny!

Announcement

Collapse
No announcement yet.

Indicator stalk

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Indicator stalk

    HI ALL.!!
    I tried repairing my indicator stalk.... bad mistake.!! after removing the two securing screws and lifting it off, bits went flying everywhere.!! lol.! springs and little ball bearings just disappeared in front of my eyes.!
    Anyway after spending what seemed like days searching on the net, not a replacement was to be found... there is plenty of similar ones but the mounting plates are slightly different, and as for the plug, I didnt see one that was like mine.....
    my question is, if i bought the "Similar" one, would i be able to tranfer it on to my backing plate, and can i cut the wires and solder them to my old plug.l........or ami I creating bigger problems for myself....
    cheers.
    john.

  • #2
    Re: Indicator stalk

    Hi John.
    Can you post a picture or offer a part number for the one you have. I have a selection of spares that might be able to help.
    Jon
    Mk2 SWB Marina Roadster with a 1800 Fiat Twin Cam engine and 5 speed Abarth gearbox built in 1987
    - I have no idea what I am talking about........ but my advice is always free! -

    Comment


    • #3
      Re: Indicator stalk

      Hi Jon.
      Sorry for the late reply, i have Builders at the house so its a bit hectic to say the least..!!
      The Part # is...... 33748A3273 or the last digit could be o (zero)...
      unfortunately, i havnt mastered how to upload a photo yet.!

      cheers Jon, i appricate your help.

      john

      Comment

      Working...
      X