Berlinetta body bolt set

[davea76]

Finally at the point where I start bolting the non oily bits back on, I've read the manual on what bolts to sue where but how many, im got down the stainless bolt route so bit want to be buying unnecessarily,, I don't suppose anyone knows how many of each I need, need the lot as I'm currently at the stage of bare chassis and all body panels need drilling as I've bough a donor kit thats as new (ish) but not been fitted

[greyV8pete]

Stainless bolts are ok for bodywork but avoid these for high stress components like suspension. I would use steel stress grade 8.8 for things like engine & gearbox and SG 10.9 for severely loaded components. Peter.

[daveghunt]

Hopefully I've attached parts list supplied with my kit (1988)
It may be a good guide?
Dave H

[daveghunt]

Some thing wrong only 3 sheets on pervious post here's the 4th

[davea76]

Stainless bolts are ok for bodywork but avoid these for high stress components like suspension. I would use steel stress grade 8.8 for things like engine & gearbox and SG 10.9 for severely loaded components. Peter.

These are literally for the body, engine suspension etc I have already rebuilt with new bolts as per manufacturer spec

[davea76]

Some thing wrong only 3 sheets on pervious post here's the 4th

That is absolutely fantastic, thankyou ever so much