Originally posted by Dane_Rescueman
View Post
Announcement
Collapse
No announcement yet.
Cortina Mk 3-5 subframe.
Collapse
X
-
-
Hi Pete, I am working on the replacement subframe and cutting off all the unnecessary bits. A local firm will then bead blast it. If the frame is sound and doesn't need any welding then they will epoxy it and use chassis black to finish off. My MoT man said that the rot on my present subframe was structurally OK but would be an MoT fail if not sorted for next time. The car is safe to drive for the time being. It was an advisory only.
The propshaft rear UJ was a fail. I have sent off the the propshaft to Derek at Proptech. I couldn't do the job myself as the rear UJ is swaged in; not on circlips. Derek will replace the rear of the propshaft with a new flange. Both UJs will be changed for circlip type, and yippee, with grease nipples. This is still away in Kidderminster. If the shaft gets here by Saturday night I will be at the meet. Its all down to how quickly I can get the shaft back otherwise without it, I would have to lift the floorboard and Flintstone the car
Derek says that Marlin used him between 2005 and 2019 to make shafts for the BMW cars. I don't know if your Hunter has one of his shafts?
I'll put a quick thread in <Cars> and let others know if they don't already.
I hope that I do get the car going in time.
Cheers
Leave a comment:
-
Originally posted by Dane_Rescueman View PostI have managed to find a Mk4 in reasonable condition so work starts soon
Leave a comment:
-
I have managed to find a Mk4 in reasonable condition so work starts soon
Leave a comment:
-
Many thanks. Mine is perforated on the LH structure behind the suspension mounts. I can cope wth corrosion but would worry about a perforation. At the moment I'm looking at shot blasting and then welding up whatever appears not ideal. Looking forward to your inspection. Thanks.
Leave a comment:
-
I have one in the garage I've been keeping as a spare "just in case " message me and I'll check at the weekend to its structural integrity but from memory it was good as I took it off my belinetta when i replaced it with my spare I just had powder coated
Leave a comment:
-
Cortina Mk 3-5 subframe.
I am trying to find a solid, bare Cortina Mk 3 -5 subframe. I know these are very rare but I though I would ask.
Rusty is OK but bent or perforated, no thanks.Tags: None
Leave a comment: