Ground Clearance

[patrick.bramman]

I have entered Class O in next years Exeter trial and while I am not going full out on the prep as the sections are supposed to be non damaging I would like to do the basics as much as possible. Does anybody have a view on what minimum ground clearance I should be aiming at?

I will be fitting a sump guard

[AndrewKB]

Re: Ground Clearance

Patrick - Read this: http://www.wheelspin.info/sectionbegins/marlins/sbmarlinsgetstart.htm

Good Luck!

Andrew

[AndrewKB]

Re: Ground Clearance

Try again ...

http://www.wheelspin.info/sectionbegins/marlins/sbmarlinsgetstart.htm

Andrew

[AndrewKB]

Re: Ground Clearance

Houston - we have a weblink problem -

http://www.wheelspin.info/sectionbegins/marlins/sbmarlinsgetstart.htm

[AndrewKB]

Re: Ground Clearance

Sorry about this folks ... I've got the link working, but there's a problem on my own site, so ...

Use link above, then select Marlins in Trials in the header, scroll to the bottom of the page, and select Getting Started, then scroll down to Class 0.

[patrick.bramman]

Re: Ground Clearance

Hi Andrew

The link works fine thanks, I will study and inwardly digest. Any other suggestions gratefully received

[AndrewKB]

Re: Ground Clearance

Website "problem" now corrected so that the last link above now opens the correct page (then scroll down to Class 0).

Patrick - if you want any more info, contact me via email at andrew(at)andrewkb.net.