wiring and temperature sender

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tara521g
    • Nov 2011
    • 17

    #1

    wiring and temperature sender

    My nearly completed 1.3 A series engined roadster has thrown up a problem today.
    I have forgotten which wires go to three components, the horn (which has two terminals), the temperature gauge sender and the oil pressure sender.
    I have three unused cables but four terminals to fill! any ideas anyone?
    I think the car has been rewired at some time so the colours on the wiring digram don't really help!
    JB
  • dogoncrazy
    • Nov 2011
    • 1616

    #2
    Re: wiring and temperature sender

    Jon
    This is how it should be:
    Horn switch - Purple from fuse, purple/blck goes to horns which are then earthed
    Temp gauge -Gren/black from sender to gauge, other terminal is supplied from 10volt side of voltage stabiliser
    Oil pressure light -White/brown from oil pressure switch, the other terminal is 12v supply from voltage stabiliser
    These are taken from my rough notes when I put mine together!

    Comment