I am re-wiring my Beri and have removed the harness - stated mildly it was a sprawling mess of wire from the donor vehicle and the electrics were somewhat unreliable.
When I took the wires off the wiper motor, I thought simple - earth and a terminal for slow and one for fast - how innocent!
I assume that the wiper motor is also from the donor vehicle - which I take to be a Mark III Cortina. The wiper motor has no makers name, but hopefully one of you experts will recognise it.
Earth to 1 gives rotation of the motor - but I can't get life out of any other combinations.
I am doing the wiring from basics as opposed to buying a pre-made harness and need to know in simple line diagram terms how to wire it so that I get the two speeds and park (I think that it did do an automatic park).
Alan
When I took the wires off the wiper motor, I thought simple - earth and a terminal for slow and one for fast - how innocent!
I assume that the wiper motor is also from the donor vehicle - which I take to be a Mark III Cortina. The wiper motor has no makers name, but hopefully one of you experts will recognise it.
Earth to 1 gives rotation of the motor - but I can't get life out of any other combinations.
I am doing the wiring from basics as opposed to buying a pre-made harness and need to know in simple line diagram terms how to wire it so that I get the two speeds and park (I think that it did do an automatic park).
Alan
Comment