sierra front caliper carriers

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • brian
    • Nov 2011
    • 17

    #1

    sierra front caliper carriers

    Im told that hens teeth are rare! Scouring the country for the above from 260mm vented discs, as used on most 83-94 sierras (ATE) Any one got a nice pair or know where they may be hiding?
  • stevejgreen
    club member
    • Nov 2011
    • 3480

    #2
    Re: sierra front caliper carriers

    Have you tried ebay? Many listed, drilled, grooved, plain, all the options are available.???
    MOC member since 05/97
    1984 Marlin Roadster SWB.
    1800TC, Unleaded ported head, stage 2 cam. Ford Type 9 gearbox, Dolomite Sprint rear axle fitted with MGF disc brakes.
    Three core radiator, Renault Clio vented front discs.
    The reasonable man adapts himself to the world; the unreasonable one persists in trying to adapt the world to himself. Therefore all progress depends on the unreasonable man.

    Loads of Marlin Reference can be found documents here or there.

    Comment

    • CosworthCabrioLee
      • Nov 2011
      • 924

      #3
      Re: sierra front caliper carriers

      Hi Brian I fitted a set off a 89 4x4 on my v8 cabrio and they were so easy to fit, they came off a damaged car, when I was looking for these their was lots around on ebay, or sierra breakers

      Comment

      • dogoncrazy
        • Nov 2011
        • 1616

        #4
        Re: sierra front caliper carriers

        Brian
        Some new ones on e bay but may be too pricey!
        Item 300179225314

        Comment

        • brian
          • Nov 2011
          • 17

          #5
          Re: sierra front caliper carriers

          Steve, Lee, Alan. Thanx for your replies.Having tried most sierra breakers on the planet without success, the ones on e-bay look tempting but,as you say, pricey!

          Comment

          • dogoncrazy
            • Nov 2011
            • 1616

            #6
            Re: sierra front caliper carriers

            Brian
            Local scrappies has a Sierra Sapphire in his yard apparently, can take a look and post back if you wish?

            Comment

            • brian
              • Nov 2011
              • 17

              #7
              Re: sierra front caliper carriers

              Hi Alan. That would a truly heroic action. The calipers are ATE and therefore, the brackets look like the ones you mention on ebay.The discs must be 260mm in diam. x 24mm. vented.Thankyou.

              Comment

              • brian
                • Nov 2011
                • 17

                #8
                Re: sierra front caliper carriers

                I hastily mention, Alan, I only need the carriers!

                Comment

                • dogoncrazy
                  • Nov 2011
                  • 1616

                  #9
                  Re: sierra front caliper carriers

                  Acknowledged - will try to get there tomorrow

                  Comment

                  • dogoncrazy
                    • Nov 2011
                    • 1616

                    #10
                    Re: sierra front caliper carriers

                    Brian
                    Can you contact me on 01332 753000 or e mail alison.hogg2 at ntlworld.com

                    Comment

                    • dogoncrazy
                      • Nov 2011
                      • 1616

                      #11
                      Re: sierra front caliper carriers

                      Sourced and on their way!

                      Comment

                      • Mike
                        Club Member
                        • Nov 2011
                        • 1444

                        #12
                        Re: sierra front caliper carriers

                        What a great club this is................

                        Comment

                        • danny_nelson
                          frequent forum contributor
                          Club Member
                          • Nov 2011
                          • 1237

                          #13
                          Re: sierra front caliper carriers

                          I second that Mike, when members get involved like this, then it could not get better. Nice one Alan.

                          Comment

                          Working...