Hi Folks,
Can anyone offer advice as to how I can overcome the problem with my test fail. On the test my 2 Ltr Romero failed mainly on two points.
1. Rear brakes - too much fluid presssure. (Sierra 10" Drums). I did fit an adjustable Brake Bias Valve but had to remove this before submitting the car for the test.
2. The Smiths Speedo clock (new) showed at speeds 30 & 40 mph as accurate, 50, 60, 70 mph as 2 mph slow. Effectively the car would have been travelling at 52, 62, 72 mph.
Any help with the above would be very greatly appreciated.
Can anyone offer advice as to how I can overcome the problem with my test fail. On the test my 2 Ltr Romero failed mainly on two points.
1. Rear brakes - too much fluid presssure. (Sierra 10" Drums). I did fit an adjustable Brake Bias Valve but had to remove this before submitting the car for the test.
2. The Smiths Speedo clock (new) showed at speeds 30 & 40 mph as accurate, 50, 60, 70 mph as 2 mph slow. Effectively the car would have been travelling at 52, 62, 72 mph.
Any help with the above would be very greatly appreciated.
Comment