Propshaft U/J Marina

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • trevor_ford
    • Nov 2011
    • 213

    #1

    Propshaft U/J Marina

    Propshaft U/J needs to be replaced on the Roadster. The motor factor is looking for measurements which means taking the bearing out but I need the car to get to the motorfactors !
    Does anyone have a part number that might help ?
    The propshaft was originally on a Marina Van. Are the U/Js different on Marinas,vans,Itals?
    Any help appreciated.
  • stevejgreen
    • Nov 2011
    • 3480

    #2
    Re: Propshaft U/J Marina

    Some Marinas had staked UJ's, not necessarly replaceable, most had Circlipped UJ's.
    All models, of Marina/Ital and 7cwt & 10cwt vans used the same sized bearings.
    The part number I have is GUJ 119 for the middle and rear and GUJ 120 for the front but I cannot tell you the difference between the two.

    It might be that the following ebay item will help.




    The following article may help more

    Last edited by stevejgreen; 01-05-12, 10:38 AM.

    Comment

    • trevor_ford
      • Nov 2011
      • 213

      #3
      Re: Propshaft U/J Marina

      Cheers Steve. I've just found the QH code QL15002 and a Unipart code of GUJ101. From memory the front and rear were the same, both circlipped, but now I have a bit of doubt ! They seem to be available with or without grease nipples so that is maybe the coding difference.

      Comment

      • dogoncrazy
        • Nov 2011
        • 1616

        #4
        Re: Propshaft U/J Marina

        Originally posted by Q163PDS View Post
        Cheers Steve. I've just found the QH code QL15002 and a Unipart code of GUJ101. From memory the front and rear were the same, both circlipped, but now I have a bit of doubt ! They seem to be available with or without grease nipples so that is maybe the coding difference.
        QL 15002 is the part no I remember as being for front /rear of propshaft

        Comment

        • donsayers
          • Nov 2011
          • 282

          #5
          Re: Propshaft U/J Marina

          I was told that there were only two sizes of UJ fitted to cars, the big and and the little one, as Spicers only made those two sizes originally. The Marina had the little one.

          Comment

          • trevor_ford
            • Nov 2011
            • 213

            #6
            Re: Propshaft U/J Marina

            Turns out it was the diff not the u/js. Fun afternoon spent replacing it. Now the car is quiet again.





            Last edited by trevor_ford; 22-05-12, 09:11 PM.

            Comment

            • stevejgreen
              • Nov 2011
              • 3480

              #7
              Re: Propshaft U/J Marina

              Ouch.
              Pleased its done.

              Comment