Tweet
My parts arrived from ebay and Demon Tweeks, one new silencer, rubbers and clamps, I was ready to do a bit but the clamps turned out to be 52mm and not the 54 I requested, still, off I went and made a start, I removed the old box and connecting pipe along with the broken bracket, measured up the connecting pipe ready for a new fabrication to be made, I got my best hacksaw out and removed 40mm from the end of the down pipe ( Replacement box is longer and has a much larger diameter) as I lay down next to the car measuring up, I was distracted by a nasty draft under the garage door, so I then fitted a strip of carpet to the door bottom - sorted. Maybe this weekend I will get round to fitting the new silencer on new hangers, if it's not too cold ?
If you are an existing member and your password is not working or has expired click here
enter your email address then click on "Forgot password"
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
If you have questions please use the Contact Page for a personal response
If you wish to contribute to our discussions then please consider joining the club - its a mere £18 per year and worth every penny!