A new thread about a clutch arm !

[dcunn]

Failed, see pic ! Peter's Dolomite one was just too big - so I'm back in the market for one PLEASE !

[stevejgreen]

Re: A new thread about a clutch arm !

Interesting. We're the springs different dimensions too?

[greyV8pete]

Re: A new thread about a clutch arm !

Failed, see pic ! Peter's Dolomite one was just too big - so I'm back in the market for one PLEASE !

As a possible fix to get you mobile could you make a couple of cuts at 45 degrees, press the ears together, then weld up? Peter.

[stevejgreen]

Re: A new thread about a clutch arm !

Or a the dolomite uses the same gearbox style, try a dolomite thrust bearing carrier?

[dcunn]

Re: A new thread about a clutch arm !

Good thoughts guys, thanks. All ideas being examined

[Alan c]

Re: A new thread about a clutch arm !

You could swap the springs its only a rivet

[dcunn]

Re: A new thread about a clutch arm !

This time the job is definitely done. Peter Bailey found me a correct part, which is now fitted, many thanks (again) Peter.

On the previous thread a NOS one was found on ebay USA, it's now arrived (still in in it's original BL blue box) and is safe in my spares holding.

SG : FWIW I haven't compared sizes of Dolomite and Marina release bearings and sleeves.

Thanks again to all. Thread closed

Rgds DC