Tweet
Can I get windscreen and door windows which have a BS, CE or EU Standard mark on the glass for my 1988 Berlinetta ? Car was failed in NCT recently.
Declan
Declan
-
-
Re: Declan
Failed NCT?Mk2 SWB Marina Roadster with a 2.0L Pinto built in 1986 -
Last edited by lil_red_roadster; 31-07-17, 06:32 PM.Marlin Roadster, LWB...1860 B Series + Ford Type 9
Renault Espace 54mm front calipers, vented discs, cycle wings and adjustable tie-bars.Comment
-
Re: Declan
I think you may be able to go to a machinery glass supplier (like someone who does tractors, forklifts etc) and get them to cut one from a blank. the BS code will likely be BS 5282 or the equivalent E 43R marking. they may be able to etch it if its not already on the sheet of glass from which the screen is cut. Another way is to use a landrover screen and get that cut at a local glazier, hope that helps
Comment
-
Re: Declan
Hi Declan,
Sorry you are having problems. I am not too familiar with the Berlinetta but if it is like the Cabrio the side windows are standard and should be marked. The mark may be hidden because the window does not come up as far as it would in the donor. If it is marked the tester may accept a photo if it obvious that it is your car.
Good luck,
PaulComment
-
Re: Declan
I received a tip from a Marlin Club Owner member which led to success. A glazier whose business is near me and specialises in glass for agricultural machinery was able to sort out the problem in about 15 minutes and at very little cost. Thanks to all for the tip.Comment
-
Re: Declan
Thanks , it worked at very little cost and in about 15 minutes.Comment
Comment