Help needed to identify my rear axle

[stefan64]

Hello to everybody; i rebuild my Marlin and think it was based on a Marina Ital (Steering, Pedalbox, Front Wheel suspension aso.);
but I am not a Profi, so I give my rear Axle to a company to clean, powder and rebuild; he has Disassembled it and by this, they cut the wheel beering down and throw it away;
now i need new and new seals, but do not find, what an axle it is; can anybody help me? i attached some photos;
Thanks and best redards
Stefan64

[stevejgreen]

Re: Help needed to identify my rear axle

Here you will find just about everything you ever wanted to know about Marina Axles.

https://kvisit.com/S1Mb2AQ

There is a great deal more information on keepandshare if you look at jiversteve.keepandshare.com

From the First Marinas to the Last Italy's,there are no changes except the size of the oil seals and the gear ratio of the differential depending on engine size.

All of the parts are the same as a Triumph Dolomite. https://www.rimmerbros.co.uk/Item--i-GRID008479

The Dolomite Sprint, listed on the same page, has a completely different axle, so be careful what you order.

[stevejgreen]

Re: Help needed to identify my rear axle

For those who need a little help and are scared of looking at keepandshare, the significant change happened when the Hub keyway changed from 3/16" to 1/4" the exact date of which is uncertain as most Poadster owners have no idea of the donor chassis number. My car, before I converted to a Dolomite Sprint axle had one of each.

Until you remove the hub from the half shaft, and unless you know the difference in oil seal sizes, you won't know.