Chassis plate

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • 272berry
    club member
    Club Member
    • May 2018
    • 25

    #1

    Chassis plate

    Here is a pic of my chassis plate thought I’d post it in case anyone can decipher it or knows any history?. In comparison to the IVA guidance it’s somewhat lacking in information and is welded on the wrong side of the chassis so I was thinking I will need a new plate not sure how I would go about ordering one from MOC and does anyone offer a stamping service
    Attached Files
  • dcunn
    club member
    Club Member
    • Nov 2011
    • 2774

    #2
    Re: Chassis plate

    Decipherisation :

    T4 Cabrio

    121 Kit number

    JG KR Initials of the people who made the kit at Marlin

    97 04 Build date of April 1997

    Please email me for more info/history on this car , my details are in Pitstop

    Rgds Dave Cunnington MOC Archivist
    Last edited by dcunn; 09-02-22, 11:46 AM.

    Comment

    • chris_cussen
      • Nov 2011
      • 684

      #3
      Re: Chassis plate

      I bought a set of alpha/numeric punches and stamped the chassis number on the top of the offside scuttle. It satisfied the IVA examiner at the time (2009), although he thought the IVA rules governing the chassis plate were silly as 'production' cars did not have to comply with the same rules.
      I also got a VIN plate off Ebay and stamped more info on that, however that is not sufficient for the chassis number as the VIN plate can be removed if it is pop-riveted on.

      Comment

      • 272berry
        club member
        Club Member
        • May 2018
        • 25

        #4
        Re: Chassis plate

        helpful info thanks Chris

        Comment

        • 272berry
          club member
          Club Member
          • May 2018
          • 25

          #5
          Re: Chassis plate

          Will PM You Dave Thanks for info

          Comment

          • dcunn
            club member
            Club Member
            • Nov 2011
            • 2774

            #6
            Re: Chassis plate

            Andy your mailbox is full, please empty !

            PM sent also

            Rgds DC

            Comment

            • etypebernard
              • Jan 2022
              • 10

              #7
              Re: Chassis plate

              To register my last project because the chassis was thin guage steel tube I cut a section out made a new section which I had engraved at a local trophy shop and welded the new section in. The new number was provided by DVLA to meet current IVA rules. Then a VIN plate was stamped to match this and had the required information re weights etc. I kept the original chassis plates in place for reference and only used the new VIN because the DVLA would only accept a 17 digit format. You can use your old VIN as a part of it and prefix or sufix with zero's to make up the correct number of digits. If you visit the DVLA web site re IVA they cover this.

              Comment