Fiat twincam clutch

[d.grose]

Any one know a supplyer for a new clutch firction plate & pressure plate. I have tried my local QH motor facters but they say QH state obsolete. Guy croft got one at £ 200

[ROBERT.JACKSON]

Re: Fiat twincam clutch

Dave
You need give more detail to narrow the search for a Fiat clutch. There are 98 clutch items for Fiat on ebay and it may link you to someone who has one or you try Buypartsonline .co.uk have a large selection of Fiat clutch parts.There is garage near me has a large stock of thousands of parts for older cars if stuck give me shout and I will try them.

[tymill]

Re: Fiat twincam clutch

I got mine in 2006 from a local shop in Peterborough no problem - had it in stock...

Try calling Millfield Autoparts 01733557457

Guy Croft is extremely knowledgeable and very helpful, but his parts are indeed very expensive. They are, however, race-spec and he stands behind his parts and work completely.

Cheers,
Ty

[terryreed1664]

Re: Fiat twincam clutch

Hi Dave,
You dont say which size of twin cam clutch your looking for.
I just had a quick look on Ebay and there seams to be one or two on there.
Like Ty I had no problem getting mine, I got mine from Autoparts in Kendal.

[d.grose]

Re: Fiat twincam clutch

I went to a differant branch of same QH supplier & they were more helpfull found a kit not a pressure plate & friction plate which I now have . i only hope it fits as i tried the pressure plate on a 2 Ltr flywheel that I have on a spare engine & it is to small .I hope the 1600 flywheel is a little smaller. Any one found this before?

[tymill]

Re: Fiat twincam clutch

The flywheel on the 1585cc twin cam engine from the 131 Mirafiori (code 131B1000 stamped above the oil filter) has a smaller flywheel than the 1995cc engines.

I don't know about the 1592cc (132AC000) and 1608cc (125BC000) engines from the 124, however.

Cheers,
Ty

[tymill]

Re: Fiat twincam clutch

Oops, meant to write 131 Supermirafiori...

[d.grose]

Re: Fiat twincam clutch

the cluch is on and all Ok but there is adifferance in the sizes between the 2ltr & 1600 the only kit they had listed was for a 1600 so if i fit the 2 ltr I need to start searching I think It may end up with Guy Croft & a lot of money.