Announcement

Collapse
No announcement yet.

Cabrio 5 stud

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Cabrio 5 stud

    Any owners out there with 5 stud wheels ? if so what type of wheels do you have on and what sizes and offsets
    Cheers Lee

  • #2
    Hi, I have 5 stud Team Dynamics on a Granada Scorpio I have recently bought from Danny. I'll look up the size in the daylight tomorrow. They do need longer than std wheel studs, I have 63mm length metric studs on order. UNF studs are also available in a range of lengths. Cheers Peter

    Comment


    • #3
      Hi Peter do you have any pictures ? I may be able to help you out with some wheel studs or indeed some wheels to fit, if you contact me on [email protected] cheers lee

      Comment


      • #4
        Next question is what size tires do people use on either 15" or 16" wheels

        Comment


        • #5
          205 - 55 15
          I seem to wear the rears out in about 7000 miles!

          Comment


          • #6
            Tyre Wear

            Chris

            Are your tyres wearing evenly across the tread?
            Mike

            Comment


            • #7
              205 55 16
              I don't even get that much from my rear Toyo's BUT still haven't done Alan's rear "tracking correction with shims" mod. Still on the to do list :-( Peter.

              Comment


              • #8
                Hi Lee,
                There is a whole load of numbers stamped on the inside of the rim, but I am fairly certain the size is 7.0J x 15H2 the other numbers are 'AP57035 5112 e35' 'MOD106546' ' PS385001'
                Looking on the Team Dynamics website the e35 refers to the offset.
                Tyre size 205/60/R15
                Pic attached
                Hope this helps
                Peter
                Attached Files

                Comment


                • #9
                  Yes, absolutely evenly. I had the rear tracking checked using laser alignment and it is spot on the setup for a Seirra. Might be something to do with my driving I suppose

                  Comment


                  • #10
                    Thanks Peter for the info how are you getting on with the cabrio build

                    Comment


                    • #11
                      Re: Cabrio 5 stud

                      Mine are 6Jx15H2 Offset 55mm with Michelin Energy 195/65 R15. Originally they were 50mm offset, but I had it increased to 55. SVA requires the rims to be inside the arches.
                      The rims are of some obscure german manufacture, but they look nice.

                      I would like to change to 16 inch with "fat" tires, because that would better fill the wheel arches. Does anyone have experience? They should clear the front stabiliser bar on full lock!

                      Comment


                      • #12
                        Re: Cabrio 5 stud

                        Hi frans the wheels on the cabrio are 205/60/15 with et 38 off set but sitting waiting to go on are a new set of 205/50/17 I had previously done this on my last cabrio and it performed great.

                        Comment


                        • #13
                          Re: Cabrio 5 stud

                          Lee, did you use the Scorpio or the Sierra hub carriers?

                          Comment


                          • #14
                            Re: Cabrio 5 stud

                            Hi fran Granada hubs machined to accept sierra bearings

                            Comment

                            Working...
                            X