I need to adjust or replace the clutch cable on my recently acquired Sierra based Cabrio but can't actually see, let alone get to, the top of the clutch pedal. Does the Cabrio use the notoriously unreliable auto adjuster? I'm guessing it does because I can't see any means of adjustment at the clutch end on the bell housing. My car is fitted with the 8V DOHC engine with MT75 gearbox. Any suggestions appreciated.
Announcement
Collapse
No announcement yet.
Clutch Cable
Collapse
X
-
Re: Clutch Cable
Hi Geoff. I replaced the adjuster quadrant on my sierra but found that the problem was elsewhere. Either the pawl spring was weak or misplaced or the pawl was binding on its pivot. It was a long time ago. However I think I still have the original (servicable) parts. Let me know if you need them and I will have a search in my "may come in handy box". Peter.
Comment
-
Re: Clutch Cable
Hi Geoff, forgot to mention. an after market kit was available to allow the use of the cable that adjusts at the bellhousing. I have never been keen on the one at the pedal in the Cabrio, wear, plastic etc. It might be worth checking with Burton, and Rally design to see if the product is still available. Nick Tisdale had this fitted on his Sierra Berly and there was a manufacturers sticker on the pedal box. Just a thought.
Danny.
Comment
Comment