Tweet
Someone at Stoneleigh mentioned having trouble finding locking wheel nuts to fit a Roadster.
These are some older style locks which should fit...on eBay here.
These are some older style locks which should fit...on eBay here.
-
Marlin Roadster, LWB...1860 B Series + Ford Type 9
Renault Espace 54mm front calipers, vented discs, cycle wings and adjustable tie-bars. -
Re: Cosmic Locking Wheel Nuts
Thanks, that may have been me, well at least I was looking...Originally posted by lil_red_roadster View Post -
-
Re: Cosmic Locking Wheel Nuts
My Cosmics will be on a Marina base, any ideas as to what I need?Comment
-
Re: Cosmic Locking Wheel Nuts
If you look at the text on the back of the packing for the locking wheel nuts a just bought it says 'for steel wheels only and the following manufacturers ally wheels only. Cosmic, 100+, Ally-Cat, K.N'. I think that's pointing to the fact that these alloys use steel inserts in the holes (my Ally-Cat's do) so you'll need either the acorn style or the flat base with conical washer that sits in the bevelled insert.Originally posted by listerjp2 View Post
I have a set of the acorn style from BG Motorsport (www.bpgmotorsport.co.uk) and have those fitted. That's a like for like replacement for me, they are good nuts.
And then I am waiting for a set of four of the flat base style with accompanying washer so I can test these as well. These are from Maurice at http://www.mistertee.co.uk.
--
#SN28-3/8" unf, Revolution 9/16" bore sleeve wheel nuts & washers.
#SW30-Cone washers, 14mm bore, flat to 60° taper seat.
--
I'll writer up my findings when I have both sets trial fitted and you're welcome to pop over one evening next week and take a look.Comment
-
Re: Cosmic Locking Wheel Nuts
sounds good to me.
I will bring one of my Cosmics with me.Comment
-
Comment
Comment