Tweet
I have a need of 4 off or 6 off 13" rostyle or steel wheels to suit a Marina roadster, with or without tyres
-
-
Re: Midget 13" rostyle wheels
DJ
MG midget wheels wont fit Marina axles of either saloon or the half ton van as they are 4" PCD.
What you need are either Marina or Triumph Herald/Spitfire/Vitesse or GT6 wheels, which can range from 3½ to 5 inch widths.
Some 1800 TC Marinas were fitted with rostylesLast edited by b_caswell; 18-01-19, 04:36 PM.Ben Caswell probably not the last word on anything here!! -
Re: Midget 13" rostyle wheels
As Ben says. 1800TC Marina wheels are the ones to hunt for...- 9th owner of T693 SSC possibly a factory built Ford based V8 Sportster
- 4th owner of Q309 RNV, an early Cabrio built by Bob Copping, owned Doug & Liz Billings for 16 years
- 9th Custodian of JRR 929D, Triumph Vitesse based special Paul Moorehouse built prior to the Triumph Roadster kits.
- 8th owner of Roadster chassis number 2395. Now owned by Barry!
- Builder of chassis number 2325 (PKK 989M) in the mid 80's. Now owned by Eric & Lynne.Comment
-
Re: Midget 13" rostyle wheels
There is a terrific write up in the latest Morris Marina Owners Club Mag, that detailed many of the 3.75†PCD wheels, from several suppliers. Worth a read!
As always, standard Marina wheels have a 1/2†offset but depending on your tyre manufacturer/profile etc. You take your chances taking care of the clearances available on the front suspension, the rear is pretty much wide open.
Spacers are dodgy as the standard studs are short, and they really need to be concentric, not so easy on a Marina saloon hub.Last edited by stevejgreen; 20-01-19, 07:53 AM.Comment
Comment